Download Print this page
Century Boost On Instruction Manual

Century Boost On Instruction Manual

2-in-1 slim high back booster

Advertisement

Quick Links

Boost On
TM
2-in-1 Slim High Back Booster
www.centurybaby.com
READ THIS INSTRUCTION
MANUAL
Do not install or use this child restraint
until you read, understand and follow the
instructions in this manual and the
warnings on the car seat.
FAILURE TO PROPERLY USE THIS
CHILD RESTRAINT INCREASES THE
RISK OF SERIOUS INJURY OR
DEATH IN A SUDDEN STOP OR
CRASH.
KEEP INSTRUCTIONS FOR FUTURE USE.
© Century Children's Products 2021
NWL0001279521D 9.21

Advertisement

loading

Summary of Contents for Century Boost On

  • Page 1 FAILURE TO PROPERLY USE THIS CHILD RESTRAINT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SUDDEN STOP OR CRASH. KEEP INSTRUCTIONS FOR FUTURE USE. © Century Children’s Products 2021 NWL0001279521D 9.21...
  • Page 2 1 Important Pages 4-17 1-A Quick Guide to Your Manual 1-B Welcome to the Century Family! 1-C Before You Begin 1-D Safety Warnings 2 Features Page 18 3 Booster Pages 19-32 3-A Booster Use 3-B Install Highback Booster 3-C Install Backless Booster...
  • Page 3: Vehicle Information

    4 Vehicle Information Pages 33-36 4-A Choosing a Vehicle Seat Location 4-B Unsafe Vehicle Seat Locations 4-C Vehicle Seat Belts 5 Care & Cleaning Pages 36-41...
  • Page 4 1-A | Quick Guide to Your Manual This booster seat is for children: Highback Booster: 40-100 lb (18.1-45 kg) and at least 4 years old Backless Booster: 40-120 lb (18.1-54 kg) and at least 4 years old Install Cup Holders Adult Assembly Required The cup holders must be installed.
  • Page 5 Slide the hook on the cup holder into the slot in the seat until you hear a “Click”. You will hear a “Click” when they are secured in place. If needed, cup holder may be removed for cleaning. To remove cup holders, pull up on the cup holder. Cup holders are dishwasher-safe (Top Rack Only).
  • Page 6 Slide two pieces together until they snap into place. CHECK to make sure two pieces are securely snapped together by pulling on them. CLICK! Head support pad Flip seat over and insert the fabric from the head support underneath the fabric on the lower back support as shown.
  • Page 7 Install Back support Connect the “U”-shaped hooks on bottom of the back support to the bars on the base until the hooks click into place. CLICK!
  • Page 8 Once the “U”-shaped hooks on bottom of the seat CLICK! back are hooked on the bars on the base, raise the back support until it is fully upright and you hear a “CLICK”. Your Century booster seat is now ready to use!
  • Page 9 Get to Know Your Booster seat Review section 2 to see all of the features of this booster seat. What Seating Location Should I Use? The best seating location for this booster seat is one that: • Is recommended by your vehicle owner’s manual. •...
  • Page 10 According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions. The center of the back seat can be the safest during a possible side impact. Using This Booster seat Correctly To make sure your child is secured properly, review section 3 to fit your child.
  • Page 11 Booster Installation Highback Backless Never Use Lap Belt Only Review section 3 Lap Belt Underneath Armrest and Lies Low Across Hips and Thighs Review section 3 Shoulder Belt Lies On the Shoulder, Between the Neck and Edge of Shoulder Review section 3...
  • Page 12 Even if this booster seat seems easy to figure out on your own, you must follow the detailed instructions in this instruction manual to ensure all steps are preformed correctly. Visit: www.centurybaby.com/safety for more information about Century’s car seat safety standards.
  • Page 13 Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address, and the restraint’s model number and manufacturing date to: Century Children’s Products Attn: Customer Service P.O. Box 169, Elverson, PA 19520-9901...
  • Page 14 For future reference or if you change addresses, record the model name, model number, date of manufacture, and purchase date of this booster seat below. You can find this information either on the registration card if you still have it or on the date label located on the bottom of the booster seat.
  • Page 15 DO NOT use this child restraint 10 years after the date of manufacture. Look for date of manufacture label on bottom of the booster seat. Century Children’s Products advises against loaning or passing along a car seat unless you know the complete history of the product. We also advise against purchasing a car seat second hand.
  • Page 16 Warm Weather Use Car seat parts can get very hot in the sun or warm weather. To avoid burns, always check before putting child in booster seat. 1-D | Safety Warnings No car seat can guarantee protection from injury in every situation, but proper use helps reduce the risk of serious injury or death.
  • Page 17 DO NOT use booster seat if it is damaged or missing parts. DO NOT use accessories or parts other than those provided by Century except for a thin towel or mat to protect your vehicle seat. Their use could alter the performance of the car seat.
  • Page 18 2-A | Features A Head Support Adjustment Lever B Head Support C Shoulder Belt Guide D Back Support E Seat Base F Cup Holder G Belt Positioning Clip (Inset)
  • Page 19 3-A | Booster Use Booster Use With Back: 40-100 lb (18.1-45 kg) 43-57 in. (110.1-145 cm) at least 4 years old Booster Use Without Back: 40-120 lb (18.1-54 kg) 43-57 in. (110.1-145 cm) at least 4 years old Vehicle Lap/Shoulder •...
  • Page 20 • Never use a vehicle lap-only belt across front of child. • DO NOT position vehicle shoulder belt under the child’s arm or back. • DO NOT allow child to slouch or slide down in the booster seat. • DO NOT position vehicle belt over top of Never Use a Vehicle Lap-Only armrests.
  • Page 21 3-B | Install Highback Booster 1. Place Booster seat Forward-Facing in Back Seat of the Vehicle Place forward-facing on a vehicle seat that has a lap/shoulder seat belt. The base should sit as flat as possible on the vehicle seat. Make sure the base completely rests on the vehicle seat.
  • Page 22 3-C | Install Backless Booster 1. Remove the Back Support Recline the back support all the way then remove from the base. 2. Place the Booster Seat Forward-Facing in the Back Seat of Vehicle Place forward-facing on a vehicle seat that has a lap/shoulder seat belt.
  • Page 23 3-D | Securing Child Highback Booster Use only the vehicle lap and shoulder belt system when restraining the child in the booster seat. 1. Place Child In Seat Have your child sit in the booster seat, with his/ her back flat against the back of the booster seat. 2.
  • Page 24 3. To Raise or Lower Head support Support Lift adjustment lever and lift or lower head support. The belt guides should be even with or just above the shoulders. Check to make sure the head support is securely locked into one of the 6 height positions by pulling up on head support.
  • Page 25 4. Buckle the Vehicle Lap/Shoulder Seat Belt Be sure the lap portion of the vehicle seat belt goes under both armrests and the shoulder belt goes under the armrest on the buckle side. Be sure the lap portion of the vehicle seat belt lies low across your child’s hips.
  • Page 26 Is Everything Correct? Never Use Lap Belt Only Lap Belt Underneath Armrest and Lies Low Across Hips and Thighs Shoulder Belt Lies On the Shoulder, Between the Neck and Edge of Shoulder...
  • Page 27 3-E | Securing Child Backless Booster Use only the vehicle lap and shoulder belt system when restraining the child in the booster seat. 1. Place Child In Seat Have your child sit in the booster seat, with his/ her back flat against the back of the vehicle seat. 2.
  • Page 28 3. Buckle the Vehicle Lap/Shoulder Seat Belt Be sure the lap portion of the vehicle seat belt goes under both armrests and the shoulder belt goes under the armrest on the buckle side. Be sure the lap portion of the vehicle seat belt lies low across your child’s hips.
  • Page 29 Is Everything Correct? Never Use Lap Belt Only Lap Belt under Armrest and Lies Low Across Hips and Thighs Shoulder Belt Lies On the Shoulder, Between the Neck and Edge of Shoulders...
  • Page 30 3-F | Using Belt Positioning Clip 1. Make Sure Vehicle’s Seat Shoulder Belt Lays Between The Neck And Edge Of Shoulder As Shown If the vehicle’s seat shoulder belt lays outside this zone, you MUST use the belt positioning clip. DO NOT use the belt positioning clip if the shoulder belt is already in the red zone.
  • Page 31 4. Free End of Strap Should Face Front of Seat 5. Place Child in Seat, Buckle Child In Seat and Attach Belt Positioning Clip With child’s back flat Rear View against the back of the vehicle seat, buckle child in. Then slide the clip onto the vehicle’s seat shoulder belt as shown.
  • Page 32 6. Adjust the Belt Positioning Clip to Fit Your Shorten Child Lengthen Lengthen or shorten the belt length as shown. Clip should fit right at the top of shoulder as shown. Be sure the lap portion of the vehicle seat belt lies low across your child’s hips.
  • Page 33 4-A | Choosing a Vehicle Seat Location Review your vehicle owner’s manual for seating locations. The best seating location for this booster seat is one that: • Is recommended by your vehicle owner’s manual, and • Results in a secure installation of this booster seat In the event there is no available back seat and / or you have no other option than to place a child in a front passenger seating position, the National Highway Traffic Safety Administration (NHTSA) recommends that you take the following steps:...
  • Page 34 4-B | Unsafe Vehicle Seat Locations Never install this booster seat in any of the following vehicle seating locations: rear-facing or side-facing vehicle seats booster mode with vehicle lap belt only seat belt...
  • Page 35 4-C | Vehicle Seat Belts Review your vehicle owner’s manual for vehicle seat belt use Vehicle Seat Belt Terms Retractor A device that winds up the unused vehicle seat belt. It is often hidden inside the panels on the walls of the vehicle or in the vehicle seat back. Latch Plate The male end of the seat belt with the silver tongue.
  • Page 36 Identify Your Seat Belt Type There is one type of vehicle The following types of vehicle seat belts seat belt that can be used with CANNOT be used safely with this booster this booster seat: seat: Lap Belt with Lap Belt Only 2 Motorized Shoulder connection points.
  • Page 37 5-A | Care & Cleaning Refer to seat pad care tag for washing instructions. Head Support Pad Clean with a damp sponge using mild soap and cool water. If needed, pad may be removed for cleaning. To remove head support cover, raise the head support to the highest position.
  • Page 38 Machine wash pad in cold water with gentle soap on delicate cycle and drip-dry. DO NOT USE BLEACH. To put the head support pad back on, reverse preceding steps. When reinstalling the head support pad, remember to insert the fabric from the head support underneath the fabric on the lower back support as shown.
  • Page 39 Undo the 2 lower elastic loops on the back of the back support. Machine wash pad in cold water with gentle soap on delicate cycle and drip-dry. DO NOT USE BLEACH. To put the back support pad back on, reverse preceding steps.
  • Page 40 The seat back pad is held in place with 2 attachment tabs. To remove an attachment tab, pull the fabric near the attachment tab diagonally toward the center of the base, then lift the fabric away. Machine wash pad in cold water with gentle soap on delicate cycle and drip-dry.
  • Page 41 Cup Holder If needed, cup holder may be removed for cleaning.To remove cup holders, pull up on the cup holder. Cup holders are dishwasher-safe (Top Rack Only).
  • Page 42 Notes...
  • Page 43 Notes...
  • Page 44: Replacement Parts

    Replacement Parts To purchase parts or accessories in the United States, please contact us at the following: www.centurybaby.com 1-844-385-0249 Store instruction manual As part of our Do More promise, we encourage everyone to recycle or reuse their cartons and in the slot with the packaging.