Table of Contents
Advertisement
Network
∫ Easy Network Setting (
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
LAN Connection Mode
Select the LAN connection method.
≥ When not using wireless LAN (when turning it
off), select "Wired".
Wireless Settings
This allows the wireless router and connection
settings to be set up. Current connection
settings and connection state can be checked.
The wireless router connection wizard will be
displayed.
Select a connection method to wireless access
point.
Search for wireless network (
PUSH button (
PIN code
This method allows you to set encryption for a
wireless LAN connection with ease.
You can connect to a wireless LAN network
by entering a PIN code generated by this unit
into the wireless access point you want to
connect to.
Manual setting
If a search using "Search for wireless
network" does not find the wireless access
point you want to connect to, or if you cannot
connect to a wireless LAN network with other
methods, enter an SSID manually to establish
a wireless LAN connection.
IP Address / DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Press [OK] to show the respective setting.
Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
18)
19)
18)
Reference
Remote Device Settings (
Press [OK] to show the following settings:
Device Name Entry
Set the name of this unit to be displayed on
the connected equipment.
Registration Type
Automatic
Manual
Remote Device List
Registering/deregistering of the displayed
equipment can be performed when "Manual"
in "Registration Type" is selected.
≥ You can register up to 16 devices.
BD-Live Internet Access (
You can restrict Internet access when BD-Live
functions are used.
≥ If "Limit" is selected, Internet access is
permitted only for BD-Live contents which
have content owner certificates.
IP Control Settings
Press [OK] to show the following settings:
Control4 Discovery
Enables Control4 mode.
≥ When this setting is switched from "Off" to
"On", "Quick Start" automatically switches to
"On".
Send Identify
Sends identifying message to Control4
controller.
≥ This function is available when "Control4
Discovery" is set to "On".
≥ For details of the settings and operations, consult your
local Control4 dealer.
- 34 -
25)
Allow connections to all
the equipment accessing
this unit.
Set the permission for
individual equipment
connections accessing this
unit.
22)
Advertisement
Table of Contents
