Assembly
Two people are recommended for assembly.
CAUTION:
1
Attaching the cabinet handle
□
Position the cabinet handle (C) over the holes on the
cabinet (B).
□
Attach with the bolts (BB) and tighten with supplied
hex key (CC).
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
NOTE:
One handle comes with this cabinet and can be
installed on either the left or right side. If a second
handle is desired, please call 1-888-HD-HUSKY to order.
B
Operation
1
Removing the drawers
□
Fully extend the empty drawer.
□
Push up the one release lever while pulling down
on the other release lever.
□
Pull the drawer outward until it is released from the
drawer slide.
BB
C
2
Attaching the casters
CAUTION:
□ Be sure the drawers are locked and lay the cabinet (B) on
its top. Use packaging material to protect the finish.
□ Attach the swivel casters (E) to the unit, on the same side
as the handle (C), insert bolts (AA) through the swivel
caster (E) into the cabinet (B).
□ Tighten all casters with supplied hex key (CC) or 12 mm
wrench/socket.
□ Repeat this process for the fixed casters (D) on the opposite
side of the cabinet (B).
□ Return the cabinet (B) to its upright position.
2
Re-inserting the drawers
□
Extend the drawer slides.
□
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□
Once properly inserted, completely close the drawer
to set the slides in their proper positions.
Please contact 1-888-HD-HUSKY for further assistance.
5
Do not over tighten the bolts.
B
E
HUSKYTOOLS.COM