Korg wavestate native User Manual page 22

Overview page
6: Mod Knob mode
[Performance, Layer A/B/C/D]
These radio-buttons control whether to show the Performance Mod Knobs, or the Program Mod Knobs for the current
Layer.
Performance: The knobs will show the Performance Mod Knobs, which can modify parameters in any or all Layers at
once.
Layer A/B/C/D: The knobs will show the values for the current Layer's Program.
7. Wave Sequence Overview
This shows a real-time overview of the Wave Sequence for the Program's newest-sounding voice.
Note: Through modulation and probability, each voice in each Lane of each Wave Sequence may be on different steps,
and may also have different Start/End/Loop Start/Loop End settings.
Single Multisample display
When the Wave Sequence page Mode parameter is set to Single Multisample, the Multisample and its related
parameters are shown instead of the Wave Sequence Overview.
8. Program parameters
This section offers immediate access to the most commonly-used Program settings, including tuning, filter settings,
and pan.
9: Program Select
This is the Program assigned to the Layer (see "Structure" on page 2). Use the < and > arrows to step through
Programs one by one, or click on the name to bring up a browser window. Right-click/control-click (macOS) on the
name to bring up a contextual menu for saving and renaming.
18