Advertisement
Installation in a Home
CAUTION:
Do not put JVC PnP in the home docking cradle until you have completed the installation.
1
Plug the audio cord's mini connector into the
back of the cradle—AUDIO.
• When using optional speaker (CS-SR100), plug
the speaker input cord's mini connector into the
back of the cradle—AUDIO. Then go to step 3.
Back of the cradle
ANT.
DC 12V
FM OUT
4
AUDIO
Note: The FM OUT jack on the back of the cradle
has no functions. Do not plug any connector into
the FM OUT jack in below steps.
You can also use FM signal transmitter to output
the sound of JVC PnP to your FM tuner. When
you use this function, refer to "4 FM Transmitter
Options" on page 24 of KT-SR2000 Instructions.
Advertisement
