Display - Dell XPS 13 9310 Setup And Specifications

Press to left-click.
3. Right-click area
Press to right-click.
4. Power button with fingerprint reader
Press to turn on the computer if it is turned off, in sleep state, or in hibernate state.
When the computer is turned on, press the power button to put the computer into sleep state; press and hold the power
button for 10 seconds to force shut-down the computer.
Place your finger on the power button to log in with the fingerprint reader.
You can customize power-button behavior in Windows. For more information, see Me and My Dell at
NOTE:
www.dell.com/support/manuals.

Display

1. Infrared emitter (optional)
Emits infrared light, which enables the infrared camera to sense and track motion.
The infrared emitter is not available if the camera is not included in the configuration ordered.
NOTE:
2. Ambient-light sensor
The sensor detects the ambient light and automatically adjusts the keyboard backlight and display brightness.
3. RGB and infrared camera (optional)
Enables you to video chat, capture photos, and record videos in RGB and infrared.
The RGB and infrared camera is optional, depending on the configuration ordered.
NOTE:
4. Camera-status light (optional)
Turns on when the camera is in use.
The camera-status light is not available if the camera is not included in the configuration ordered.
NOTE:
5. Infrared emitter (optional)
Emits infrared light, which enables the infrared camera to sense and track motion.
8 Views of XPS 13 9310