Advertisement
Only for KS-K6002: An optional hard-wired FM transmitter—FM Switching Box Assembly (Parts No.
112C3159) is available. By connecting this Assembly between the FM OUT terminal of the cradle and the
antenna input terminal of your car stereo, you can obtain stable and reliable transmission/reception.
B If your car stereo has a line input (LINE IN
or AUX)...
Plug the supplied audio cord into the back
of the cradle—AUDIO OUT.
• Plug the audio cable's white (L ch) and red
(R ch) connectors into your car stereo.
4
For KS-K6002:
Activate the FM signal transmitter (refer to
page 24 of KT-SR1000' Instructions), and set
the FM frequency output selector to select one
of the following frequencies—88.1 MHz, 88.3
MHz, 88.5 MHz, and 88.7 MHz.
88.1
• It is recommended to preset
88.3
88.5
88.7
MHz
Note: You can also connect a cassette adapter or
an audio cord (both not supplied) to the AUDIO
OUT jack to send the singals to your car stereo.
the frequency selected by the
FM frequency output
selector into your car stereo
so you can easily tune in to
the frequency.
7
Advertisement
