Troubleshooting If You Cannot Print As Expected - Canon imagePROGRAF iPF710 Manual

Troubleshooting If You Cannot Print as Expected

Problems with the Printing Quality
Phenomenon
Printing is faint
Cause
You may be printing on the
wrong side of the paper.
The Printhead nozzles are
clogged.
Because the printer was left
without Ink Tanks installed
for some time, ink has become
clogged in the ink supply system.
Paper is jammed inside the Top
Cover.
During borderless printing, the
ink was not dry enough before
cutting.
Printing may be faint if Print
Quality in Advanced Settings
in the printer driver is set to
Standard or Draft.
64
Corrective Action
Print on the printing surface.
Print a test pattern to check the nozzles
and see if they are clogged.
(→P.43)
After the Ink Tank has been installed
for 24 hours, run Head Cleaning B.
(→P.44)
Follow the steps below to remove the
jammed piece of paper inside the Top
Cover.
1. Press the Online button to bring the
printer offline.
Open the Top Cover and make sure
2.
the Carriage is not over the Platen.
3. Remove any scraps of paper inside
the Top Cover.
4. Close the Top Cover.
For tips on clearing paper jams, refer to
the following topics.
(→P.73)
(→P.78)
Specify a longer drying period in the
printer menu, in Roll DryingTime in
Paper Details.
(→"Main Menu Settings," User Manual)
In Advanced Settings in the printer
driver, choose Highest or High in Print
Quality.
(→"Giving Priority to Particular Graphic
Elements and Colors for Printing," User
Manual)