Video Stabilizer - JVC HR-J4005UM Instruction Manual

16
EN
••
MENU
3
OK
PLAYBACK AND RECORDING FEATURES (cont.)
1
1 2 3
2
4 5 6
7 8 9
0
4
CH
••
PUSH JOG

Video Stabilizer

By activating the Video Stabilizer you can correct vertical
vibrations in the picture when playing back unstable recordings
that were made on another VCR. When this function is set to
"ON", vertical vibration will be automatically corrected. *The
default setting is "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar
(arrow) to "FUNCTION
SET" by pressing CH 5 ∞ or
PUSH JOG % fi, then press
OK or PUSH JOG
ACTIVATE VIDEO STABILIZER
3
HR-J4005UM
FUNCTION
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
= VIDEO STABILIZER
B.E.S.T.
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Move the highlight bar (arrow) to "VIDEO STABILIZER"
by pressing CH5 ∞ or PUSH JOG%fi , then press OK or
PUSH JOG to set to "ON" .
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
Regardless of the setting, this function has no effect, during
recording and during special-effects playback.
When you finish viewing the tape, be sure to set it back to
"OFF".
The Superimpose mode indications may jitter vertically when
"VIDEO STABILIZER" is set to "ON".
MAIN MENU
= FUNCTION SET
TUNER SET
INITIAL SET
.
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
HR-J6005UM
FUNCTION
OFF AUTO TIMER
ON SUPERIMPOSE
AUTO SP = EP TIMER
OFF
=VIDEO STABILIZER
ON
ON NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
OFF
ON
OFF
ON