Table of Contents
Advertisement
30
www.aeg.com
b) Pour the liquid detergent in the same
compartment after inserting the relevant
container
c) Put the tablets in the compartment
. Make sure that the Pods option is
activated.
.
4. Pour fabric softener in the
compartment
5. Close the detergent dispenser.
12.4 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The
related programme indicator comes
on.
The indicator of the Start/Pause
button flashes.
The display shows an indicative
programme duration, the maximum
declared load for the set programme
(only for a few seconds), the default
temperature, the default spin speed and
the washing phase indicators (when
available).
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators come on in the
display and the given information
changes accordingly.
In case a selection is not
possible, no indicator
comes on and an acoustic
signal sounds.
12.5 Starting a programme
Touch the Start/Pause
the programme.
The related indicator stops flashing and
stays on.
In the display, the indicator of the
operating phase starts flashing.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
12.6 Starting a programme
with the Finish in option
1. Touch this repeatedly until the
display shows the desired time within
.
button to start
Advertisement
Table of Contents
