Marantz NR1506 /U1B Service Manual page 52

1.10. About the error codes
See the table below for error codes and details of faults when the firmware is updated through USB memory.
Error
USB Update Error Display
Code
01
C o n n e c t i o n F a i l 0 1
02
F i l e s N o t F o u n d
03
N o t M a t c h F i r m
04
C o n n e c t i o n F a i l 0 4
05
C o n n e c t i o n F a i l 0 5
08
C o n n e c t i o n F a i l 0 8
09
C o n n e c t i o n F a i l 0 9
0A
C o n n e c t i o n F a i l 0 A
0B
F i l e s N o t F o u n d
0C
C o n n e c t i o n F a i l 0 C
10
U p d a t i n g
11
U p d a t i n g
12
U p d a t i n g
13
E r a s e f a i l
14
U p d a t i n g
Unable to detect USB.
No Firmware File in USB.
0 2
The Firmware File in the USB does
0 3
not support your model and area.
Failed to obtain the entire Firm-
ware information.
Time Out while obtaining the
entire Firmware information.
Error notification received while
requesting the Firmware Info.
Time Out while obtaining Firm-
ware information.
Unable to detect USB for Firm-
ware Download.
No Firmware File for Firmware
0 B
Download.
Received value with the invalid
Package Version.
No Update Packet received from
f a i l 1 0
CY920 (Time Out).
Abnormal data in Update Packet
f a i l 1 1
received from CY920 (CRCError).
Abnormal data in Update Packet
received from CY920 (PacketNo-
f a i l 1 2
Error).
Failed in Block Erase before rewrit-
1 3
ing Main.
Failed in Block Erase while rewrit-
f a i l 1 4
ing Main.
52
Details of Error code Remedies
Disconnect and reconnect the USB
memory.
Make sure that the Firmware File is in
the USB memory.
Make sure that the model name and
area are supported by the Firmware
File.
Start the USB Update again.
Start the USB Update again.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
Disconnect and reconnect the USB
memory.
Make sure that the Firmware File is in
the USB memory.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.