Osd Information; Weak Signal; No Program - JVC I'Art Pro AV-48P776 User Manual

OSD Information

Weak Signal

This OSD warning appears when the digital channel that you have selected is too weak to
receive or no signal is being detected for that channel.

No Program

If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM"
appears on the television screen. It appears when that channel is not receiving a signal and you
have the Noise Muting function OFF and you have a single screen. It moves automatically every
two seconds to prevent the screen from burn-in. See page 6.
Note:
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off
functions that you set, are still active.
70
Weak Signal
15