Using The Software - Gear Head CR6300 User Manual

USING THE SOFTWARE:

NOTE: The software is for editing your phone book stored on your SIM card.
1. Make sure your SIM card is installed in your card reader. Plug your card reader into an
available USB port of your computer.
2. Open "GSimReader APP" under "All Programs", the following screen will appear on your
desktop.
Menu File
Function
PIN
Management
Help
Buttons SIM Operation:
It offers six tools
to edit the file
opened under
the SIM
Operation area.
In this drop-down menu, you can open a Text File from your
computer, print and save the file after you have edited it in
the File Operation area. You can also exit the program by
clicking "Close" in the drop-down menu.
Select "Phone book" or "Short Message Service" in this
drop-down menu, data of your phone book or short message
record from your SIM card will be displayed in the SIM
Operation area.
If you have use your phone or your Phone Service Provide
has enabled the PIN function of your SIM Card, you will
need to use "PIN Verify" function to enable the software to
read your SIM or use the "PIN Request" function to turn
on/off PIN function. Note: most SIM card do not have the
PIN function enabled. To avoid incompatibility issues, the
"Change Code" function for changing the PIN of your SIM
Card is disabled. Please use your phone to enable PIN.
Click to show the version of this program.
Click to initiate communication with your SIM card.
Note: Some older version SIM cards can't be
initiated using this button. Please try the "Specific
Read" button.
Click to open your phone book from your SIM card.
Click to open the short message record from your
SIM card.
Save the records read from your SIM Card to your
computer.
5