Pyle PDWMU20 User Manual

PDWMU20
Wireless Transmitter and Receiver Set
Transmitting TV/Projector Audio to Headphones/Speakers/
Soundbar/Camera, Plug & Play, No sound Delay,
3.5mm AUX & RCA Input and Output Interface
Features:
• Convenient Microphone Voice-Over
• Auto Pairing, with 7 Channels for Pairing
• Simple Plug-and-Play Operation
• Integrated Low Noise Circuitry
• Noise-Eliminating SMT Technology
• Crisp Audio Clarity for Vocals & Singing
• Connect & Stream Audio to External Devices
• Transmitter with one 3.5mm Jack for Wired Microphone Input
• Transmitter with one 3.5mm Aux Jack for Audio in
• Receiver with Two 3.5mm Jacks for Audio Output
• Aux (3.5mm) Audio Input/Output Jacks Perfect for Professional Audio Stage & Studio Performances
Handheld Transmitter Specs:
• Carrier Frequency: U Band
• Transmit Power: Max 18 dBm
• Current Consumption: <130 mA
• Standard: 7 Fixed Frequency (Frequency Range: 636一800MHz)
• Bult in Polymer battery: 480Mah
• Antenna: Built-in
Receiver Specs:
• Receiving Frequency: U Band
• Sensitivity: <108dBm@12dB SINAD
• Signal to Noise Ratio: <0.5%
• Audio Output: 800mV-1.4V
• Working Range: Standard conditions 30 to 50 m
• Receive Channel: 7 Channels
• Supply Voltage: 5V
• Battery Type: 480mAh, Polymer
• Frequency Response: 20Hz-18kHz
• Power Consumption: 65mA
• Antenna: Built-in
• Product Dimension (L x W x H): 1.97'' x 1.97'' x 0.91'' -inches ( 5 x 5 x 2.3CM)
www.PyleUSA.com
What's in the Box:
• 3.5mm Wired Microphone
• USB Charging Cable
• Audio Output Cable
• Receiver Unit
• Transmitter Unit