Advertisement
143
Maintenance and Trouble Clearing
Replace RU Mounted on Pole
Figure 47
Mount RU on Pole Mount
Note: If necessary, use the eye bolts to hoist the RU up the pole.
Step 6
Using a 17 mm socket, secure the mounting adapter plate to the mounting plate using M10 x 30 mm bolts and
split and flat washers. Do not tighten the bolts yet.
Step 7
Torque each bolt on the top and bottom of the mounting plate using a 11/16 socket to 27 Nm.
✓
This task is complete.
Fujitsu and Fujitsu Customer Use Only
·
Issue 1.1, May 2021
Release 1.0
Advertisement
