Playback Features - JVC SR-MV40US Instructions Manual

OPERATIONS ON VCR DECK
44
EN

Playback Features

Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
Press VCR/DVD repeatedly so that the VCR lamp lights up on the
unit.
TBC CH +/–
VCR/DVD
2
3
8
AUDIO
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback mode,
the picture will be distorted.
the noise bars will appear.
there may be a loss of color.
you cannot hear the sound.
Still Picture/Frame-By-Frame Playback
1
Press 9 to pause during playback.
2
Press 9 to activate frame-by-frame playback.
To resume normal playback, press 4.
Slow Motion
1
Press 9 to pause during playback.
2
Press and hold 9 for 2 seconds, then release. Press 9 and
release again to return to still picture.
The speed changes for each direction by pressing 3 and 5
repeatedly.
To resume normal playback, press 4.
VCR/DVD
3 5
8 4 9 7
1 2
1
4 5 6
7 8 9
0
6
4
5
9
CH +/–
Variable Speed Search
During playback, press 5 for forward variable speed search, or
3 for reverse variable speed search.
Each press of the button increases the search speed for each
direction.
When pressing 5:
(SP): +5x{+7x
(EP): +11x{+21x
When pressing 3:
Once 3 is pressed, reverse search starts in –1x normal playback
speed. After this process, each press of 3 changes the search
speed between –5x and –7x in SP mode, –11x and –21x in EP mode.
(SP): –1x]–5x{–7x
(EP): –1x]–11x{–21x
To resume normal playback, press 4.
Instant Replay
During playback (or Live Memory Playback), press
rewinds the picture a little (about 7 seconds) and resumes
playback.
If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
Skip Search
During playback, press
sections.
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
To resume normal playback, press 4.
Index Search
Your unit automatically marks index
codes at the beginning of each
recording. This function gives you
quick access to any one of 9 index
codes in either direction.
NOTE:
Before starting, make sure the unit is in
the Stop mode.
Press 2 or 6 to activate Index Search. "INDEX –1" or "INDEX
1" is displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press 2 or 6 repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press 2
twice.
To locate the beginning of D from the current position, press 6
once.
Current position
When the specified index code is located, playback begins
automatically.
1 to 6 times to skip over unwanted
Index number
. The unit