Table of Contents
Advertisement
Available languages
Available languages
Stopping Pressure Washer (See Fig 16)
•
Turn the pressure regulator to depressurise the delivery pipeline.
•
Turn the engine switch to the "OFF" position.
•
Turn the fuel valve to the "OFF" position.
•
Turn off water and squeeze the trigger handle to release all water pressure.
Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with
WARNING!
the controls.
Using the Spray Gun (See Fig 17 - 18)
•
Flip the lock tab behind the trigger up or down until it clicks to apply or remove the safety. Pull back on the trigger to
begin operating pressure washer.
•
To stop water flow, release trigger.
LOCK OUT
FIG 17
Using Spray Nozzle (See fig 19)
•
To connect or disconnect spray tip, pull back on the quick-connect collar. Insert or remove spray tip then release collar.
•
When spray tip is connected, pull on the spray tip to make sure it is secured.
•
For general cleaning use the 40° spray tip. This option is for cement walkways.
OPERATION
FIG 16
SLOT
18
TRIGGER
FIG 18
Advertisement
Chapters
Table of Contents
