Table of Contents
Advertisement
Cleaning and Maintaining
Problem
The wired remote
control does not
operate.
The air conditioner
is not turned on or
off immediately
with the wired
remote control.
The Timed on/off
function does not
operate.
The indoor unit
display blinks
continuously.
I want to get cooler
air.
The air is not cool or
warm enough.
18
English
remote control display. In this case, turn off both the air conditioner and
after setting the on/off time. Set the on/off time.
Turn on the air conditioner again by pressing the
the conditioner.
If the indoor unit display is still blinking, contact a service centre.
enhance the cooling efficiency.
In the Cool mode, cool air does not come out if the set temperature is
higher than the current temperature.
–
current temperature.
– Remote control:
current temperature.
Both cooling and heating do not operate in the Fan mode. Select the
Cool, Heat, Auto, or Dry mode.
decrease the cooling and heating efficiencies. Clean the air filter
frequently.
If a cover is on the outdoor unit or any obstacle is present near the
outdoor unit, remove them.
exposed to direct sunlight or close to a heating appliance.
If the indoor unit is installed in a place exposed to direct sunlight, pull
Solution
indicator is displayed at the bottom right of the
Advertisement
Table of Contents
