Koolatron BITE SHIELD GUARDIAN MK14 Instructions Manual page 11

ASSEMBLY (cont...)
Step 5: Placement of the Propane Tank.
Do not use a Propane Tank larger than 9.07kg/20lbs Place a full tank of propane on the
base as shown. Screw the free end of the regulator hose onto the propane tank valve.
WARNING: Follow the safety information listed on the tank.
STARTING
Step 1
Open the gas valve on the tank to the full open position by turning it counterclockwise
until the knob stops rotating.
Step 2
Press the START switch on the side of the main body. This activates the heater and the
vacuum fan. You should see a red light through the window.
Step3
Press and hold the valve safety (silver) button, while looking through the Window into
the main unit.
Step 4
Press/click the (red) igniter button repeatedly (located on the underside of the main unit)
until a blue flame appears directly in front of you, approximately at the top center inside
the unit. If the flame doesn't appear the first time, keep clicking the Igniter button several
times while keeping pressed the valve safety button until you see a flame, up to 10
seconds maximum trial period.