JVC KD-DV5000 Instructions Manual page 71

Symptoms
• "No Disc" flashes on the
display.
• "No Magazine" flashes on
the display.
• "Reset 8" flashes on the
display.
• "Reset 1" – "Reset 7"
flashes on the display.
• The CD changer does not
work at all.
Output signals through the DIGITAL OUT terminal
They differ depending on the "DIGITAL AUDIO OUT" setting on the Setup Menu.
DIGITAL AUDIO OUT
Playback Disc
DVD 48 kHz, 16/20/24 bit Linear PCM
96 kHz, Linear PCM
with Dolby Digital
with DTS
Video CD, Audio CD
Audio CD with DTS
MP3
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate)
through the DIGITAL OUT terminal if the discs are not copy-protected.
Causes
No disc is in the magazine.
Discs are inserted upside down.
Discs are unplayable.
The current disc does not
contain any MP3 files.
No magazine is loaded in the
CD changer.
This unit is not connected to the
CD changer correctly.
The built-in microcomputer may
function incorrectly due to
noise, etc.
PCM ONLY
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM
Remedies
Insert discs into the magazine.
Insert discs correctly.
Insert playable discs.
Insert a disc that contains
MP3 files.
Insert the magazine.
Connect this unit and the
CD changer correctly and
press the reset button on the
CD changer.
Press the reset button on the
CD changer.
Press the reset button on the
panel holder after detaching
the control panel. (The clock
setting and preset stations
stored in memory are
erased.) (See page 2.)
Output Signals
DOLBY DIGITAL/PCM
*
48 kHz, 16 bit Linear PCM
None
Dolby Digital bitstream
44.1 kHz, 16 bit Linear PCM
Linear PCM
STREAM/PCM
DTS bitstream
DTS bitstream
71