BenQ Home Entertainment Series User Manual page 38

Notice
Replace lamp soon
Equivalent lamp hour >XXXX hours
Order a new lamp at www.BenQ.com
Notice
Replace lamp now
Equivalent lamp hour > XXXX Hours
Order a new lamp at www.BenQ.com
Notice
Out of lamp usage time
Replace lamp (refer to user manual)
then reset the lamp timer
Order a new lamp at www.BenQ.com
"XXXX" shown in the above messages are numbers that vary depending on different models.
Resetting the Light timer
After the startup logo, open the On-Screen Display (OSD) menu. Go to Advanced Menu - Settings
> Light Settings and press OK. The Light Settings page appears. Highlight Reset Light Timer and
press OK. A warning message is displayed asking if you want to reset the Light timer. Highlight Reset
and press OK. The light time will be reset to "0".
Do not reset if the lamp is not new or replaced as this could cause damage.
38 Maintenance
It is strongly recommended that you replace the lamp at this
age. The lamp is a consumable item. The lamp brightness
diminishes with use. This is normal lamp behavior. You can
replace the lamp whenever you notice that the brightness level
has significantly diminished.
OK
Press
The lamp MUST be replaced before the projector will operate
normally.
OK
Press
(FOR SERVICE PERSONNEL ONLY)
to dismiss the message.
to dismiss the message.