JVC GR-DVX4EA Instructions Manual page 30

30
EN
Date/Time Menu Explanations
INDICATION ON
OFF
ON SCREEN OFF
ON
DISPLAY ON
OFF
Allows you to set the current date and time (
DATE/TIME
System Menu Explanations
OFF
TELE MACRO
ON
SCENE 5S
5SD
ANIM.
BEEP/TALLY ON
OFF
WIND CUT OFF
ON
SOUND MODE 32 kHz
48 kHz
This number is necessary when connecting the camcorder to a device such as a computer using
ID NUMBER
the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
DEMO. MODE OFF
ON
: Factory-preset
RECORDING
Makes all the indications appear in the camcorder (
Keeps all the indications (except the tape running indicator, warnings, etc.) from
appearing in the camcorder (
Keeps the camcorder's display from appearing on the connected TV screen.
Makes the camcorder's display appear on screen when the camcorder is connected to
a TV.
Makes the date/time settings appear in the camcorder (
Keeps the date/time settings from appearing in the camcorder.
Usually the distance to a subject where the lens is in focus depends on the zoom
magnification. Unless there is a distance more than 1m to the subject, the lens is out of
focus at the maximum telephoto setting. When set to "ON", you can shoot a subject as
large as possible at a distance of approx. 60 cm.
• Depending on the zoom position, the lens may go out of focus.
pg. 22.
pg. 22.
Allows you to record a 1/3-second clip. By using an inanimate object and changing its
position between shots, you can record the subject as though it is moving (
The tally lamp comes on to signal the start of recording.
The beep sounds when the power is turned on or off, and at the beginning and end of
recording. Also to activate the shutter sound effect (
The tally lamp remains off at all times.
Even though not heard while shooting, shutter sound is recorded on the tape.
Disengages the function which cuts down on noise created by wind.
Helps cut down on noise created by wind.
• " " appears.
•The quality of the sound will change. This is normal.
Enables recording of stereo sound on four separate channels, and is recommended for
use when performing audio dubbing.
Enables recording of stereo sound on two separate channels.
Automatic demonstration will not take place.
Demonstrates certain functions such as Programme AE with special effects, etc., and
can be used to confirm how these functions operate. When "DEMO. MODE" is set to
"ON" and the Recording Menu is closed, demonstration starts.
NOTES:
If a tape is in the camcorder, the demonstration cannot be turned on.
By turning off the camcorder, "DEMO. MODE" is set to "OFF" automatically.
Advanced Features (cont.)
pg. 21).
pg. 21).
pg. 8).
pg. 24).
pg. 20).
pg. 22).