Dubbing Images Recorded On A Tape To A Multimediacard - JVC GR-DVM70U Instructions Manual

PHOTO
(SNAPSHOT)
Button
Lock Button
Power Switch
Power lamp
Play/Pause (4/6)
Button
SNAPSHOT MODE Button
Display
SP
4
Dubbing Images Recorded On A Tape To A
MultiMediaCard
Images can be dubbed from a tape to a MultiMediaCard.
1
LOAD CASSETTE AND
MULTIMEDIACARD
2
SELECT OPERATION MODE
Set the Power Switch to "
down the Lock Button. Open the LCD monitor fully
or pull out the viewfinder fully.
3
SELECT IMAGE TO BE DUBBED
Press 4/6 to start playback. At the moment you find
the image you wish to dub, press it again to engage
Still Playback.
4
SELECT SNAPSHOT MODE
Press SNAPSHOT MODE to select the Snapshot
mode to use for dubbing the image to the
MultiMediaCard.
5
START COPYING
Press PHOTO (SNAPSHOT). The image is stored in
the MultiMediaCard.
•" " blinks during dubbing.
NOTES:
If PHOTO (SNAPSHOT) is pressed in step 5 when a
MultiMediaCard is not loaded, the message "COPYING
FAILED" is displayed.
If an image recorded on the tape using the WIDE mode
( pg. 38) is dubbed to a MultiMediaCard, the WIDE
mode identifying signal is not dubbed with it.
77
EN
" while pressing