Table of Contents
Advertisement
Many of your TV's functions are controlled through the menu function.
MENU
Picture
Brightness
Contrast
Colour
Sharpness
Text bright
memory?
Tint (only when NTSC is detected)
Sound
Volume
Bass
Treble
Balance
Timer
OFF Timer
Setting
Child lock
AV2
Preset
Tuning
Swap
Fine Tuning
During the menu operation the following buttons are used.
: To enter the menu function.
u
: To go back and to exit the menu function.
: To navigate up and down in the menus.
: To navigate forwards to the next screen or to
+
activate settings.
Picture menu
1. Press the MENU button to select main menu, select Picture using
e e or d d buttons.
Picture
Sound
Timer
Setting
Preset
2. Press 1 to enter. Select and adjust to obtain the best picture
settings for your environment.
Text bright : Brightness of Teletext screen
MINIMUM / CENTRE / MAXIMUM.
Tint :
Colour phase if NTSC equipment is detected.
Storing picture preferences
If you have altered any of the settings in the Picture menu you can
store them. You can be recall again later.
In the picture menu press 6
6 to select memory.
Brightness
Contrast
Colour
Sharpness
memory ?
Press the 1 button, a tick appears in the box and the settings are
stored.
Sound menu
1. Press the MENU button to select main menu and using 5
6
6 select Sound.
2. Select and adjust to obtain the best sound settings for your
environment using 5
5 , 6
6 , 1 or 2.
Picture
Sound
Timer
Setting
Preset
3. Press MENU button repeatedly to exit.
MENU OPERA
TION -
MENU OPERA
TION -
ON/OFF
VIDEO/S-VIDEO
AUTO
SEMI
CH:34
CH:34
P:04
P:04
Skip OFF
Skip: OFF
Memory?
Memory?
Brightness
Contrast
Colour
Sharpness
Text bright
memory?
memory
5 or
Volume
10
Bass
Treble
Balance
Analogue channels
Analogue channels
Timer menu
Off-timer setting
The Off timer will switch the TV set into the standby mode when the
selected time has elapsed.
1. Press the MENU button to select main menu. Press 5
select Timer.
2. Press 1 to enter OFF Timer.
3. Press 1 button, and highlight time setting column by pressing
the 5
5 or 6
6 buttons.
time setting column
OFF-Timer
00 30
Not set
When the time setting column is selected its colour changes to yellow.
The time changes in 30 minute steps.The maximum time is 2:00hrs.
When you are ready to store your settings press the 1 button and
the setting column numbers colour changes to green. The tick
appears as shown above and its colour changes to yellow.
If you have set the off timer, then one minute before the TV switches,
a display appears on the screen.
4. Press the MENU button repeatedly to exit the menu.
If the TV set is switched off by the Mains Switch 4 , or you enter
the preset mode, the timer settings will be cancelled.
Setting menu
Child lock
You can prevent small children from operating the TV with the front
buttons of the TV set.
1. Press the MENU button and select main menu.
2. Press 5
5 or 6
6 to select Setting, press 1 to enter Child lock
/ AV2 menu.
Picture
Sound
Timer
Setting
Preset
3. Press 5
5 or 6
6 to select Child lock, press 1 to select ON or
OFF.
The child lock mode will be reset to "OFF" when the TV set is
switched off with the Mains ON/OFF 3 switch.
Setting menu
Setting of AV2 input mode
If you use a VCR which has S-VHS, you should connect it to AV2 and
change the AV2 menu to S-VIDEO.
1. Press 6
6 to select AV2, press 1 or 2 to select S-VIDEO /
VIDEO.
Picture
Sound
Timer
Setting
Preset
2. Press MENU button repeatedly to exit.
5 or 6
6 to
00 30
OFF-Timer
Set
OFF
Child lock
ON
AV2
S-VIDEO
Child lock
AV2
VIDEO
13
Advertisement
Table of Contents
