JVC GR-D72US Software Installation And Usb Connection Manual page 8

Jvc gr-d72us: connection guide
Hide thumbs Also See for GR-D72US:
Table of Contents

Advertisement

Updating [Device Manager] (Windows
If the camcorder is connected to the PC with the USB cable before installing [USB Mass Storage Class driver]
or [USB Video Streaming driver], the installation might not be performed properly.
In this case, follow the procedure described below to update the [Device Manager] and install [USB Mass
Storage Class driver] and [USB Video Streaming driver] properly.
NOTE:
Disconnect any other USB audio devices from PC before performing the following procedure.
Installing [USB Mass Storage Class driver] (Windows
1
Use the USB cable to connect the camcorder to the PC. (
2
Click [Start], go to [Settings], and then click [Control Panel]. Double click the [System]
icon.
3
Select the [Device Manager] tab.
4
Delete [GR-D73*] in [Other devices].
* The model name depends on the connected camcorder.
5
Disconnect the USB cable from the camcorder. Restart the PC.
6
Load the provided CD-ROM in the PC. Install [USB Mass Storage Class driver]. (
7
Use the USB cable to connect the camcorder to the PC.
Device driver is installed.
8
Confirm the [Removable Disk] icon is displayed in [My Computer].
Installing [USB Video Streaming driver]
1
Use the USB cable to connect the camcorder to the PC. (
2
Click [Start], go to [Settings], and then click [Control Panel]. Double click the [System]
icon.
3
®
Windows
98/98SE/Me: Select the [Device Manager] tab.
®
Windows
2000/XP: Select the [Hardware] tab and click [Device Manager].
4
Delete [GR-D73*] in [Other devices].
* The model name depends on the connected camcorder.
5
Disconnect the USB cable from the camcorder. Restart the PC.
6
Load the provided CD-ROM in the PC. Install [USB Video Streaming driver]. (
®
Windows
XP: Refer to "Installing USB Video Streaming driver for Windows
installation.
7
Use the USB cable to connect the camcorder to the PC.
Device driver is installed.
®
Windows
2000: When a warning message dialog box on digital signature appears, click [OK] to
continue installation.
8
Confirm the following devices are displayed in [Device Manager] by performing steps 2 –
3.
[JVC PIX-MCV Video Capture] in [Imaging Devices]
[JVC PIX-MCV Audio Capture] in [Sound, video and game controllers]
[JVC Composite PIX-MCV Device] and [JVC Communication PIX-MCV Video Driver] in [Universal
Serial Bus Controllers]
®
)
®
98/98SE only)
— 8 —
pg. 9)
pg. 9)
®
XP users" (
pg. 4)
pg. 4)
pg. 7) for

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D93us - grd93 minidv digital camcorderNdn-921-v03-2p

Table of Contents