Panasonic HC-W580M Operating Instructions Manual page 76

HDR Effect
You can change the level of image contrast correction in HDR Movie Mode.
The icon changes each time you touch it.
(Low) #
(Low):
(High):
≥ You cannot change the level of this effect when recording a motion picture or during PRE-REC.
≥ You may not see the full effect depending on the recording conditions.
Level Shot Function
This function detects the horizontal tilt of the unit, and automatically corrects it to the level
position.
Each touch of this icon switches Level Shot Function.
(Normal) #
(Normal):
(Strong):
Off:
≥ The icon changes when the tilt exceeds the correction range.
/
/ /
≥ When the tilt exceeds the correction range, move the unit to the position where
displayed.
≥ This function's default setting is
≥ The range that this icon can be displayed correctly the slope is about 45 o to the horizontal
direction.
≥ Level Shot Function is cancelled when [LEVEL GAUGE] is set to [ON].
≥ When recording horizontal images using a tripod, attach the unit on the tripod using [LEVEL
GAUGE], and then set Level Shot Function to
≥ When you switch the setting of the Level Shot Function, the screen may become black
momentarily.
≥ If you set the option to
≥ This function cannot be set when recording a motion picture or during PRE-REC.
[W580] [W580M]
(High)
Sets the correction level to low.
Sets the correction level to high.
(Strong) # Off
Corrects the tilt.
Strengthen tilt correction.
Cancel the setting.
When the tilt is corrected
/ When the tilt is above the correction range
(Normal).
(Normal)/
(Normal) or
(Strong), the angle of view will change.
- 76 -
(l 45, 61)
/
(l 81)
(Strong) before use.
is