Clarion DXZ646MP Owner's Manual page 13

Am / fm cd / mp3 / wma player
Hide thumbs Also See for DXZ646MP:
Table of Contents

Advertisement

Setting
Set to CD
Disc
Mixed with CD and
Play CD
MP3/WMA type tracks
CD type track only
Play CD
MP3/WMA type track only
Play MP3/WMA
2. After making these settings, remove the disc
and then reinsert it.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WWA
type, the CD cannot be played normally in some
cases.
Disc-In-Play function
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc auto-
matically when the disc is inserted even if the
power is not turned on.
CAUTION
• Do not try to put your hand or fingers in the
disc insertion slot. Also never insert for-
eign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD la-
bel, or discs with marks where cellophane
tape or rental CD labels were removed. It
may be impossible to extract these discs
from the unit and they may cause the unit
to break down.
Backup Eject function
Just pressing the [Q] button ejects the disc
even if the power to the unit was not turned on.
1. Press the [OPEN] button to open the FLIP
DOWN PANEL.
Note:
• If the FLIP DOWN PANEL will not open far
enough, open it gently with your hand.
2. Press the [Q]button. Remove the disc after it
is ejected.
3. Close the FLIP DOWN PANEL.
Note:
• Always close the FLIP DOWN PANEL once you
take out the disc.
Listening to a disc already loaded
Set to MP3/WMA
in the unit
Press the [FNC] button to select the CD/MP3/
Play MP3/WMA
WMA mode.
Play CD
When the unit enters the CD/MP3/WMA mode,
Play MP3/WMA
play starts automatically.
If there is no disc loaded, the indication " NO
DISC" appears in the title display.
∗ The mode changes each time the [FNC] button is
pressed. (Modes are not displayed for equipment
that is not connected.)
Radio
Loading a CD
1. Press the [OPEN] button to access the CD
SLOT behind the FLIP DOWN PANEL.
2. Insert a CD into the center of the CD SLOT
with the labeled side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be another
CD in the mechanism or the unit may require service.
• Discs not bearing the
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the center of the insertion slot.
3. Close the FLIP DOWN PANEL.
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• After loading a CD, always close the FLIP DOWN
PANEL.
Pausing play
1. Press the [
"PAUSE" appears in the display.
2. To resume CD play, press the [
again.
CD/MP3/WMA Operations
CD/MP3/WMA
(TV)
AUX
CAUTION
] button to pause play.
(CD changer)
(DVD changer)
or
mark and
] button
17
DXZ646MP

Advertisement

Table of Contents
loading

Table of Contents