Wi-Fi
To disable Wi-Fi connections, select [Disable].
Confirm Settings
Enables you to check the printer name, IP address, and other details.
Other Settings
[Set Printer Name] enables you to rename the printer. Press <
input screen, and then enter a new printer name (
Select [IPv4/IPv6 Settings] ► [IPv4] to enter the IP address and subnet mask for IPv4
manually.
Select [IPv4/IPv6 Settings] ► [IPv6] to enable or disable the IPv6 address.
Set the type of security in [Security settings].
Caution
[IPv6] is not available with [Direct Connection].
[Security settings] can be configured when [Direct Connection] is used or when
SELPHY is connected to SELPHY Photo Layout.
Connection may not be possible with [Security settings] set to [WPA3], depending
on the smartphone OS, software version, or other factors. In that case, set it to
[WPA2].
Reset Settings
Enables you to reset Wi-Fi settings such as the printer name, router information, and
password.
).
100
> to access the