Care And Maintenance - Titan TTI931BVC Manual

Care and maintenance

EN
After use
1. Switch the product off, remove the battery back (12) and let it cool down.
2. Check, clean and store the product as described below.
The golden rules for care
WARNING! Always switch the product off, remove the battery pack
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life
of the product.
3. Inspect the product before each use for worn and damaged parts. Do not
operate it if you find broken and worn parts.
General Cleaning
1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for
areas that are hard to reach.
2. In particular clean the air vents (21) after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
4. Check for any damage and wear. Repair damages in accordance with this
instruction manual or take it to an authorised service centre before using
the product again.
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare
24
(12) and let the product cool down before performing inspection,
maintenance and cleaning work!
WARNING! Only perform repairs and maintenance work according
to these instructions! All further works must be performed by a
qualified specialist!
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
TTI931BVC