Other Features; Set The Alarm Timer - Philips AJ7400 User Manual

6 Other features

Set the alarm timer

You can set two alarms to ring at different time.
Note
•
Make sure that you have set the clock correctly.
1
Press and hold AL1 or AL2.
» The hour digits begin to blink, and you
can hear a beep.
» [AL SET] (alarm set) is displayed on
the screen.
2
Press / (TUNE+/TUNE-) repeatedly
to set the hour, then press OK/
DOCK 2 to confirm.
» The minute digits begin to blink.
3
Press / (TUNE+/TUNE-) repeatedly
to set the minute, then press OK/
DOCK 2 to confirm.
» An alarm day option begins to blink.
4
Press / (TUNE+/TUNE-) repeatedly
to set the days for alarm ringing (everyday
in a week, workdays only, or weekends
only), then press OK/
confirm.
» An alarm source option begins to blink.
5
Press / (TUNE+/TUNE-) repeatedly
to select an alarm sound source (BT,
DOCK 2, DOCK 1, BUZZ, FM), then press
OK/ DOCK 2 to confirm.
» An alarm volume level begins to blink.
12 EN
DOCK 2 to
6
Press / (TUNE+/TUNE-) repeatedly
to select your preferred alarm volume
level, then press OK/
finish the alarm setting.
» You can hear two beeps.
Tip
•
If you select DOCK 1/DOCK 2 as the alarm sound
source, when there is no device docked, the alarm will
automatically switch to the buzzer sound.
•
If both alarms are set to the same time, only Alarm 1
will ring.
View the alarm settings
Press AL1 or AL2 to view alarm settings.
•
Activate and deactivate the alarm
timer
1
Press AL1 or AL2 to show the alarm
setting.
2
To activate the timer, press AL1/AL2 again
repeatedly until [
displayed.
To deactivate the timer, press AL1/AL2
•
again repeatedly until
displayed.
Snooze
• When the alarm rings, press
SNOOZE/BRIGHTNESS.
» The alarm stops, and the alarm icon
flashes.
» The alarm will resume ringing 9
minutes later.
Note
•
When the units runs on battery power, only the buzzer
can be used as the alarm sound source.
DOCK 2 to
AL 1] or [ AL2] is
is no longer