INSTRUMENT AND CONTROL FUNCTIONS
To close the seat
1. Fold the seat down, and then
push it down to lock it in place.
2. Remove the key from the main
1
switch if the scooter will be left
unattended.
2
TIP
Make sure that the seat is properly se-
cured before riding.
3
4
5
6
7
8
9
Helmet holder
1
1. Helmet holder
The helmet holder is located under the
seat.
To secure a helmet to the helmet
holder
1. Open the seat. (See page 3-8.)
2. Attach the helmet to the helmet
holder, and then securely close
the seat. WARNING! Never ride
with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss
of control and possibly an ac-
cident.
[EWA10161]
3-9
EAU14301
To release the helmet from the hel-
met holder
Open the seat, remove the helmet
1
from the helmet holder, and then
close the seat.
EAU1044E