Line-Level Input Connection - JBL G SUB 10 Owner's Manual

+ R – –
Speaker Level Input
(from amplifier)
+ R –
+ R –
Speaker Level Output
(to external speakers)
G Sub10 Subwoofer
1. First determine the distance
between the receiver/TV/source
amplifier and your subwoofer.
2. Now make two hookup wires this
length.
3. Strip off 3/8" of insulation from both
ends of each conductor wire.
4. Twist each set of thin wires into a
tightly-bunched spiral.
5. Now find a visual difference
Receiver or Amplifier
Subwoofer or Line Output
L +
R
RCA Phono
Cables
Line
– L +
Input
– L +
Figure 1: Line-Level Input Connection
G SERIES LOUDSPEAKERS
L
L
Level
Reverse Normal
R
Min Max
between the two conductors of each
molded pair of speaker wire.
These differences can be a different
color wire (copper or "silver"); a strand
of yarn in one conductor; thin, raised
ribs on one part of the outer
insulation; or a printed "+" marking on
one of the insulators. It doesn't matter
which of the two strands of wire go to
(+) and (–) on the receiver/TV/source
3
Phase Crossover Freq
50 (Hz) 200