BFM Futureglass Union Assembly Instructions

futureglass
Thank you for purchasing the Futureglass
ASSEMBLY INSTRUCTIONS
The glass supplied is toughened to BS6206A for safety. In order to maximize this safety; please follow the following precautions.
1. Never drag the table - Always lift with assistance
2. Replace any damaged glass with that of identical
specification.
3. Never place heavy objects onto the table.
4. Use a suitable non-abrasive glass cleaner.
5. Take care when moving the table.
visit www.futureglass.co.uk for information and support
please email any feedback to reception
reception@futureglass.co.uk
T +44 (0) 1376 330300
Contemporary furniture in glass
1. Unpack all of the components, leaving the glass facing
down on a protective layer (preferably still in the original
packaging). The stainless steel bosses should be facing up.
2. Screw the studs with centralising washers provided into
the bosses on the glass top (turn in a clockwise direction).
Ensure they are secure. Slide the stainless steel leg over
the studding and centralising washer.
3. With bolt in the square foot boss locate the extender nut
on the stud within the leg and tighten the bolt with an allen
key until the foot is secure do not overtighten the bolt.
Repeat this for each leg.
4. With help lift and turn the table the right way up.
Union Table Stainless Steel Leg!
The design of Union allows easy assembly by a competent adult.
The simple assembly means that the table can be constructed in the
shortest of times.
Please take a few moments to read these instructions to get the
most from the table.
8. Avoid subjecting the table to impact.
9. Never sit or stand on the table.
10. The table is not suitable for rough use
11. Always lift the table by the glass to move it, never
drag it or lift by the legs.
Futureglass is a proud member of
the Association for British Furniture
Manufacturers