Carrier 50ZHK Installation Instructions Manual page 22

Single-packaged heat pump system with puron (r-410a) refrigerant single phase 2 to 5 nominal tons (sizes 024-060)
Hide thumbs Also See for 50ZHK:
Table of Contents

Advertisement

50ZHK: Installation Instructions
Start-Up Checklist
(Remove and Store in Job Files)
I. PRELIMINARY INFORMATION
MODEL NO.: ____________________________________
SERIAL NO.: ____________________________________
DATE: __________________________________________
TECHNICIAN: ___________________________________
II. PRESTART-UP (Insert check mark in box as each item is completed)
( ) VERIFY THAT ALL PACKING MATERIALS HAVE BEEN REMOVED FROM UNIT
( ) REMOVE ALL SHIPPING HOLD DOWN BOLTS AND BRACKETS PER INSTALLATION INSTRUCTIONS
( ) CHECK ALL ELECTRICAL CONNECTIONS AND TERMINALS FOR TIGHTNESS
( ) CHECK THAT INDOOR (EVAPORATOR) AIR FILTER IS CLEAN AND IN PLACE
( ) VERIFY THAT UNIT INSTALLATION IS LEVEL
( ) CHECK FAN WHEEL, AND PROPELLER FOR LOCATION IN HOUSING/ORIFICE AND SETSCREW TIGHTNESS
III. START-UP
Supply Voltage: L1-L2
Compressor Amps: L1 (C) ____________________ L2 (S) _______________L3(R) ____________
Indoor (Evaporator Fan Amps _______________Outdoor Fan Amps _________________
Temperature-Cooling Mode
Outdoor Air Temperature:________________ DB ___________ WB
Return-Air Temperature:_________________ DB ___________ WB
Cooling Supply Air _____________________ DB ___________ WB
Pressures - Cooling Mode
Refrigerant Suction ______________________________ psig
Suction Line Temp* _______________________________
Refrigerant Discharge ____________________________ psig
Discharge Temp† _________________________________
Temperature-Heating Mode
Outdoor Air Temperature:________________ DB ___________ WB
Return-Air Temperature:_________________ DB ___________ WB
Supply Air ____________________________ DB ___________ WB
Pressures - Heating Mode
Refrigerant Suction ______________________________ psig
Suction Line Temp* _______________________________
Refrigerant Discharge ____________________________ psig
Discharge Temp† _________________________________
* Measured at suction inlet to compressor
{Measured at liquid line leaving condenser.
My Learning Center is your central location for professional residential HVAC training resources that help strengthen careers and businesses. We
believe in providing high quality learning experiences both online and in the classroom.
Access My Learning Center with your HVACpartners credentials at www.MLCtraining.com. Please contact us at mylearning@carrier.com with
questions.
© 2022 Carrier. All rights reserved.
Edition Date: 03/22
Catalog No: 50ZHK-01SI
Replaces: 50ZHC-05SI
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
22

Advertisement

Table of Contents
loading

Table of Contents