Yamaha YZ85W1 Service Manual page 131

15 mm
(0.6 in)
10 mm
(0.4 in)
HANDLEBAR
6. Install:
• throttle cable cap
• grip cap (lower)
• cover (grip cap)
7. Adjust:
• throttle cable free play
Refer to "ADJUSTING THE THROTTLE
CABLE FREE PLAY" in chapter 3.
8. Install:
• brake master cylinder
• brake master cylinder bracket
NOTE: NOTE:
Install the bracket so that the arrow mark
face upward.
9. Install:
• engine stop switch
• clutch lever holder
• clamp
NOTE: NOTE:
The engine stop switch and clutch lever holder
should be installed according to the dimen-
sions shown.
10.Install:
• clutch cable
NOTE: NOTE:
Apply the lithium soap base grease on the
clutch cable end.
4-59
CHAS
1 Nm (0.1 m•kg, 0.7 ft•lb)
4 Nm (0.4 m•kg, 2.9 ft•lb)
9 Nm (0.9 m•kg, 6.5 ft•lb)
4 Nm (0.4 m•kg, 2.9 ft•lb)