Wolf 802633 Installation Instructions And Use And Care Manual

W W
O L F A R M I N G
I
N S T A L L A T I O N
Warming Drawer Pan Set
Model Number
WDCONTAINERS (802633)
¥
¥ Warming Drawer Pan Set
Contains:
(2) Side-to-side support rails (long)
(2) Front-to-back support rails
(short)
(1) Filler panel
(1) Full size pan with lid,
21" x 13" x 4"
(2) Half size pans with lids,
21" x 6-1/2" x 4" each
(2) Quarter size pans with lids,
10-1/2" x 6-1/2" x 4" each
Install Warming Drawer Pan Set
Set includes extra pans for a
variety of combinations. Not all
pans will fit in the Wolf
Warming Drawer at one time.
1. Remove protective packaging
from side-to-side support rails.
2. Completely open Warming
Drawer fully and remove
warming drawer rack.
3. Install front side-to-side support
rail by installing large tab into
large slot on left front slot and
small tab on right front slot of
warming drawer interior pan.
Make sure that tab size and slot
size are proportional.
D P
R A W E R
I
N S T R U C T I O N S
SIDE-TO-SIDE
SUPPORT
RAILS
Illustration 1
S
A N E T
U
A N D S E
FRONT-TO-BACK
SUPPORT
RAILS
WIDE SLOTS
TOWARDS
INSIDE
C
A N D A R E
WIDE SLOTS DROP RAIL
TOWARDS
SMALL SLOTS
REAR
DRAWER FRONT
SMALL SLOTS
TOWARDS
FRONT
INTO
FILLER
PANEL