IRiver iFP-990 Instruction Manual page 22

Recording from an external audio source
Preparing Recording from an external audio source
1
1
Connect the LINE OUT jack of the external equipment to the LINE IN jack of the player.
To record from an external microphone, change the "Record Type" in the Settings menu.
Note
(Refer to page 5-24/5-25)
2
2
Push and hold the NAVI/MENU button to enter to Setup Menu. Select "Control" by pushing
the NAVI/MENU button toward
3
3
Adjust Line-in Recording Mode, Line-in Recording Volume, Line-in Auto-Sync and Line-
in/External Mic on Control Menu.
Refer to page 5-24/5-25 for details.
4-17
or direction.
Recording from an external audio source
Recording from an external audio source
1
1
Press and hold the MODE/REC button. The current function appears on the LCD screen.
2
2
Press the NAVI/MENU button to the
Press the NAVI/MENU button (or PLAY/STOP) to enter recording standby mode.
3
3
Begin playback on the external device and then press the MODE/REC button on the iriver
player to begin recoding.
or direction to select Line In mode.
4-18