IRiver ChromeX iMP-150 User Manual page 34

FAQ
Q
How do I make a CD from a Language Study tape?
A
To convert the tape's information into CD requires many items, including:
Sound Edit program (Goldwave, Cooledit), stereo cable to connect each side, and
a player to play the Tape.
Connect Stereo cable to earphone output on the player and Line in socket of
Computer Sound Card or Mic socket; then record the sound using the Sound Edit
Program.
For details, refer to the Beginner's Guide at website.
Q
I recorded a CD but it contains less than 20 songs.
A
When you burn a CD with MP3 file, you need to confirm that it is recorded in DATA
format. If the recorded CD has less than 20 songs, it means the CD was burned in
Audio CD format.
Q
Does the sound quality vary depending on the recording speed or recording format?
A
The sound quality does not vary depending on the recording speed or recording
format. However, due to the characteristics of Data random storage, the
recognition may be slow.
Q
Can I burn a CD using an iRiver product?
A
iRiver products do not have Recording CD function, iRiver products only play the
data on CD.
Thus, you need to purchase a blank disc to make a CD. To know 'how to burn a
CD' , please refer to the Beginner's Guide
Q
The CD recognition is not good and a 'No disc' message is displayed.
A
CD recognition depends on several factors:
1. CD-Media
2. The burning/Recording Speed
3. The CD surface
Burning Speed is an important matter, as well as a good CD surface. When you
burn a CD at a high speed, the data writing may not reliable. In that case, it is
recommended to burn a CD at a lower speed or to use different media.
- 33 -