Epson TM-P20II User Manual page 9

TM-P20II User's Manual
1 Roll paper cover
2 USB-C connector
3 Cover open lever
4 Operation panel
5 Manual cutter
6 Belt clip
7 Battery
8 NFC Tag
1 Roll paper cover
2 USB-C connector
3 Cover open lever
4 Operation panel
5 Belt clip
6 Battery
the position of
7 symbol
wireless charger
8 NFC Tag
CHAP02.FM (A4 size) Rev.A
Part Names
Open this cover when installing or replacing the roll paper.
Connects a USB cable.
Operate this lever to open the roll paper cover.
There are buttons to operate the printer and LEDs to display the printer status.
A cutter for cutting roll paper.
A clip for hanging the printer from a waist belt.
Provides electricity to the printer. The printer does not work without the battery installed.
A mark is printed here to indicate the position of the NFC tag. Bring an NFC-compatible
device close to the mark to obtain information about the printer.
Open this cover when installing or replacing the roll paper.
Connects a USB cable.
Operate this lever to open the roll paper cover.
There are buttons to operate the printer and LEDs to display the printer status.
A clip for hanging the printer from a waist belt.
Provides electricity to the printer. The printer does not work without the battery installed.
The printer can be charged by aligning the
commercially available wireless charger.
A mark is printed here to indicate the position of the NFC tag. Bring an NFC-compatible
device close to the mark to obtain information about the printer.
symbol with a Qi symbol on a
9