Special Features - Samsung WA49B5105 Series User Manual

Special features

ATC (Auto Temperature Control)
ATC enables the washer to control water temperatures in each washing cycle using the internal thermistor.
It is designed to maintain certain washing temperatures for best results.
NOTE
• If you select NORMAL or HEAVY DUTY, you may notice the washer supplying cold water. This is normal
because the machine is designed to reduce power consumption. In these cycles, the water temperature
for Hot is similar to bath-water temperatures, and Eco Warm is similar to comfortable swimming pool
temperatures.
• To wash clothes at a specific temperature, you must choose a different cycle first.
Child Lock
The Child Lock function locks the washer lid to prevent children from climbing into and suffocating inside
the tub.
Activating the Child Lock function
Press and hold Temp. and Spin simultaneously for approximately 3 seconds.
• When you activate the Child Lock function, the
Using the Child Lock function
If the lid is opened when the Child Lock function is on, "dC" is displayed and an alarm sounds.
• If the water level in the tub is above the safe water level, "dC" is displayed on the LED display and the
washer starts to drain water by force after 30 seconds.
• If the water level in the tub is above the safe water level and the Child Lock function is turned on while
the lid is open, "CL" is displayed on the LED display, even if the washer is turned off, and the washer
drains water by force.
• When Child Lock is on and the washer is off, if the water in the tub is above the safe water level and the
lid is opened, "CL" is displayed on the LED display. No alarm sounds, but the washer drains the water.
When the draining operation finishes, the power automatically turns off again.
• If you activate the Child Lock function while the washer is running, the START/PAUSE button will not
work.
• After the compulsory drain, "CL" blinks at 1 second intervals and the washer enters the "CL" mode.
(When the washer is in the "CL" mode, only the POWER button works.)
• To cancel the "CL" mode, turn the power off and then on again.
• To cancel the "dC" mode, deactivate the Child Lock function. To deactivate the Child Lock function, press
and hold Temp. and Spin simultaneously for at least 3 seconds.
Untitled-1 39
Child Lock indicator blinks.
English 39
2022-06-29 10:55:53