Table of Contents
Advertisement
Connecting (Windows
Connecting the USB cable
Connect the USB cable to copy still image
files in a memory card to the PC.
Camcorder
USB Cable
To USB
Connector
1
To assure safety, make sure all
units are turned off before
making any connections.
2
Use the USB cable to connect
the camcorder to the PC.
NOTES:
● It is recommended to use the AC
Adapter as the power supply instead
of the battery pack.
● When the USB cable is connected,
turning on or off the camcorder or
switching the VIDEO/MEMORY (DSC)
mode on the camcorder causes
malfunctions of the PC.
● If you connect the camcorder to the PC
through a USB hub, compatibility issues
between the hub and the PC may result in
instability in the operation of the PC. If
this happens, connect the camcorder
directly to the PC, not through the hub.
● Do not use an extension USB cable.
®
)
To USB
Connector
PC
Viewing the Contents of a
Memory Card (Windows
1
Make sure that there is a
memory card in the camcorder.
2
Set the camcorder's VIDEO/
MEMORY Switch to "MEMORY".
3
Set the camcorder's Power
Switch to "PLAY" while
pressing down the Lock Button
located on the switch.
The camcorder turns on.
4
Connect the camcorder to the
PC with a USB cable. (
On the camcorder's LCD monitor
[USB] appears.
5
When using Windows
The [Removable
Disk] window
appears on the
PC's screen
after a moment.
Select [Open
folders to view
files using
Windows
Explorer] and
click [OK].
NOTE:
If the [Removable Disk] window does
not appear, confirm the connection
pg. 6) or perform the steps 1 and
(
2 below.
When using Windows
1 Double-click the [My Computer] icon
on the desktop. The [Removable
Disk] icon which represents the
memory card in the camcorder
appears in the [My Computer]
window.
— 6 —
®
)
pg. 6)
®
XP:
®
2000:
Advertisement
Table of Contents
