Page 1
ORIGINAL INSTRUCTIONS Instruction Manual Cordless Circular Saw Model HSC20V CAUTION: READ THIS INSTRUCTION MANUAL BEFORE USE THIS MACHINE HYUNDAI 32, rue Aristide Bergès - ZI 31270 Cugnaux – France MADE IN PRC 2017 Licensed by Hyundai Corporation, Korea...
Page 2
1. SAFETY INSTRUCTIONS GENERAL TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
Page 4
a) Maintain a firm grip with both hands on the saw and position your arms to resist kickback forces. Position your body to either side of the blade, but not in line with the blade. Kick back could cause the saw to jump backwards, but kickback forces can be controlled by the operator, if proper precautions are taken.
Page 6
This tool is designed for cutting wood that will fit in machine. It is not suitable for cutting timber for fuel. Only use saw blades that are suitable for machine and do not use cutting discs. This tool is specially design to work with Hyundai range of battery and charger.
Charging HYUNDAI range battery and charger not sold together with this tool. Battery has not been fully charged at the factory. Before using it for the first time, charge the battery for 60min to 130min. Insert the charger plug into the charging socket and plug the charger into a 230V/50Hz electrical outlet.
Remove the blade screw by turning it clockwise with the hex key, while keeping the spindle lock button depressed Fig.4. Remove the blade washer noting which way round it is fitted. Fit the saw blade inside the lower blade guard and onto the spindle ensuring that the direction of rotation arrow on the blade corresponds with the direction of rotation arrow on the fixed guard arrow Fig.5.
4. OPERATION Warning! Before each use always check the operation of the lower guard before connecting the battery to the Circular Saw. Do not use the Circular Saw if the lower guard does not close smoothly over the saw blade and returns fully to the closed position. Keep blades clean &...
d. DEPTH OF CUT AT 90° Always keeps correct blade depth setting. The correct blade depth setting for all cuts should not exceed 1/4 in. below the material being cut. More blade depth will increase the chance of kickback and cause the cut to be rough. For more depth of cut accuracy, a scale is located on the upper blade guard.
5. MAINTENANCE AND STORAGE a. Maintenance After each use, remove the accumulator from its compartment and check for damage. Correct maintenance is essential to maintain the original efficiency and safety of the machine over time. Keep all nuts, bolts and screws tight to be sure the equipment is in a safe working condition. Never use the machine with worn or damaged parts.
HYUNDAI ZI, 32 rue Aristide Bergès – 31270 Cugnaux – France Declare that the following machine: Cordless Circular Saw HSC20V Serial number: Is in conformity with the Directive Machine 2006/42/EC and with the regulation transposing it. Also in conformity with the following Directives:...