Display
en
A
Detailed description of the programme settings from ~ Page 26
--------
Indicator/
Description
symbol
Programme status:
Drying
Š
Dryness level: Iron Dry
ö
Dryness level: Cupboard Dry
»
Dryness level: Cupboard Dry
Ò
Plus
Anti-Crease
Q
- ˜ -
Pause
Program end
"Ÿš
‹ ‹ : ‹ ‹
Programme duration
e.g. ñ 02:45
Programme delay
Empty the condensation
ð
container ~ Page 33
Fluff filter
å
Automatic heat exchanger
ó
rinse
Rinsing progress indicator
ªªª
Wi-Fi
|
Energy manager
±
22
Start and Pause
Information
Continuously lit: Status indicator
Expected programme duration in hours and minutes.
Appears when altering and activating the "Ready in"
time
Empty the condensation container and then rein-
■
sert it.~ Page 33
Then press A (Start/Pause).
Clean the filter in the condensation container.
■
If the optional drain hose* is installed, make sure
■
that the drain hose:
– Is correctly connected. ~ Page 46
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
Run the intensive appliance care programme.
■
Check that no debris has found its way into the base
■
unit. Open the maintenance flap and remove any
debris.
Remove the fluff ~ Page 34
The heat exchanger is cleaned automatically. Do not
pull out the condensation container or cancel the pro-
gramme while this is displayed.
Off: Wi-Fi is switched off and your appliance is not
■
connected to your home network.
Flashing: The appliance is trying to connect to your
■
home network.
Lit: Wi-Fi is switched on and your appliance is con-
■
nected to your home network.
Lit: appliance is connected to the smart energy system
(Energy manager) (not available in every country)