Table of Contents
Advertisement
en Basic settings
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Basic settings
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid dispensing
Intensive drying
EmotionLight
1
Factory setting (may vary according to model)
34
Display text
Selection
1
H04
H00 - H07
1
r04
r00 - r06
1
d00
d00 - d01
1
E02
E00 - E02
Description
Set the water softening system to
your water hardness.
→ "Setting the water softening sys-
tem", Page 25
Level H00 switches the water soften-
ing system off.
Set the amount of rinse aid to be dis-
pensed.
→ "Setting the amount of rinse aid",
Page 27
Switch the rinse aid system off with
level r00.
The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note: Not suitable for delicate items
of tableware.
Switch Extra Dry on "d01" or off
"d00".
Interior light.
¡ With the setting "E00"m the in-
terior light is switched off.
¡ With the setting "E01", the in-
terior light can be activated via
the ON/OFF
button.
¡ With the setting "E02", the in-
terior light goes on when you
open the appliance door.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
Advertisement
Table of Contents
