Table of Contents
Advertisement
BEFORE USING THE MACHINE
(1)
(1)
Document feeding area cover
Open this cover to remove an original misfeed or clean the
paper feed roller.
(2)
Original setting indicator
This indicator lights when the document is correctly loaded on
the document feeder tray.
(3)
Original guides
These guides help ensure that the original is scanned correctly.
Adjust the guides to the width of the original.
(4)
Document feeder tray
Originals must be placed face up.
(5)
Original exit tray
The original is discharged to this tray after scanning.
(6)
Main power indicator
This lamp lights up when the machine's main power switch is in
the " " position.
(7)
Exit tray unit (right tray)*
Set so that paper is output into this tray as required.
(8)
Keyboard
Use this as a substitute for the soft keyboard displayed on the touch
panel.
When not being used, it can be stored under the operation panel.
(9)
[Power] button
Use this button to turn the machine's power on and off.
►
TURNING ON/OFF THE POWER (page 7)
(10)
Facsimile expansion kit*
(11)
Extension phone jack (TEL)*
When the fax function of the machine is used, an extension
phone can be connected to this jack.
* Peripheral device. For more information, see the User's Manual.
6
(2)
(3)
(4) (5)
(6)
(7)
(8)
(13)
(14)
(15)
(16)
(9)
(10)
(11)
(17)
(18)
(19)
(12)
Telephone line jack (LINE)*
When the fax function of the machine is used, the telephone line
is connected to this jack.
(13)
Motion sensor
This sensor detects the presence of a person that approaches
the machine, and automatically wakes the machine from sleep
mode (Motion Sensor Mode Only).
(14)
USB port (A type)
This is used to connect a USB device such as a USB memory
device to the machine.
Supports USB 2.0 (Hi-Speed).
(15)
Bypass tray
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11"R or A4R, pull out
the extension guide.
►
Bypass tray (page 16)
(16)
Cover for toner collection container
Open this cover when you need to replace the toner collection
container.
(17)
Toner collection container
This container collects excess toner that remains after printing.
(18)
USB connector (B type)
The machine does not use this connector.
(19)
USB port (A type)
This is used to connect a USB device such as a USB memory device to
the machine.
Supports USB3.0 (SuperSpeed).
(20)
Power plug
(21)
LAN connector
Connect the LAN cable to this connector when the machine is
used on a network.
(12)
(20)
(21)
Advertisement
Table of Contents
