AD20 TEST PROCEDURE
Version 0.2
Creation Date:2019/9/26
1. Introduction
This document describes QC tests for AD20
1.1 Confidentiality
This specification is submitted by Yahorng to subcontractors on the understanding that its
contents will not be transmitted to any third party without prior written consent from
Yahorng
1.2 Test software description
During the test, the
red
graphic control element indicates that the test has not be en
performed.
Yellow
and
green
graphic control elements indicate that the test is in progress .
The
blue
graphic control element indicates that the test is correct .
3