Advertisement
Driver Installation Mac OS
Driver Installation for Mac
Step 1 Double click on the "MacOS / 8.6-9.0" folder.
Step 2 Click on "Installer" in the folder.
Step 3 Restart the computer.
Driver Installation for Mac
Step 1 Double click on "Mac OS\ 9.0.4 or later" folder
Step 2 Click on "Installer" in the folder.
Step 3 Restart the computer.
Driver Installation for Mac
This USB 2.0 All-in-1 Card Reader is driver-free for Mac
OS X 10.1.2 system, you don't have to install any driver,
just connect card reader to the computer directly. Mac OS X
10.1.2 will detect and install all the associated files
automatically.
Hardware Setup Mac OS
1. Connect USB 2.0 All-in-1 Card Reader to computer's
USB port.
2. Insert the memory card to the slot, the drive icon will
appear on the desktop, all procedures may be
manipulated as a Mac
3. To change memory cards
Drag and drop the drive icon you wish to change into the
trashcan. Remove existing memory card, and insert a new
card you wish to use into USB 2.0 All-in-1 Card Reader, a
new driver icon will appear in few seconds. All procedures
may be manipulated again as a Mac
4. To disconnect USB 2.0 All-in-1 Card Reader:
Drag and drop all drive icons into trashcan, and unplug
USB 2.0 All-in-1 Card Reader from the computer to
disconnect.
USB 2.0 All- in-1 Card Reader
TM
OS 8.6 & 9.0
TM
OS 9.0.4 or later
TM
OS X 10.1.2 or later
TM
Hard Disk.
TM
HardDisk.
7
1
Advertisement
