Related Manuals for Iqinvision IQ540SI-V9
Summary of Contents for Iqinvision IQ540SI-V9
- Page 1 IQeye 5 Series ™ Part of the IQeye BASIC LINE of Network Surveillance Products IQeye 540SI, 541SI and 542SI Quick Install Guide IQinVision ® When you can’t afford to miss a thing.
-
Page 2: Terminal Block
Plug the IQeye camera into the network. a. If using PoE, plug your camera into an IEEE 802.3af PoE injector or switch. b. If using direct power, con- nect a 12-24 VDC or 24 VAC power supply to the supplied terminal block. - Page 3 IQeye 5 Series RCA Connection Open the Iris adjustment on the lens to full open, and move the focus ring on the lens until the image is in focus. If the IQeye 5 Series field of view and focus adjust will be performed using a browser, insert the IQtools CD into the CD drive of the PC.
- Page 4 IQtools CD Click “Scan for IQeye cameras on my network” to find IQeye cameras. The detected cameras will be dis- played in the IQfinder window. Highlight a camera from the list and click “Assign IP” to edit the selected cameras IP settings.
- Page 5 The “Assign IP” window IQ541S allows the IP address, Subnet and Gateway of the camera to be changed. It also allows the camera to be configured for DHCP. Click the “Apply” button after making the desired changes IQfinder - Assign IP Address Note: Changing between a static IP address and DHCP will require the camera to be rebooted.
- Page 6 Note: The default username is “root” and the default password is “system”. For further information see the IQeye documentation on the installation CD or at http://www.iqeye.com. IQinVision, Inc. 33122 Valle Road San Juan Capistrano, CA 92675-4853 USA Part Number: 901-0180 Rev A...