Standard Cmos Setup - IBT Technologies MB877 User Manual

BIOS SETUP

Standard CMOS Setup

"Standard CMOS Setup" choice allows you to record some basic
hardware configurations in your computer system and set the system
clock and error handling. If the board is already installed in a working
system, you will not need to select this option. You will need to run the
Standard CMOS option, however, if you change your system hardware
configurations, the onboard battery fails, or the configuration stored in
the CMOS memory was lost or damaged.
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
Drive A
Halt On
Base Memory
Extended Memory
Total Memory
At the bottom of the menu are the control keys for use on this menu. If you
need any help in each item field, you can press the <F1> key. It will display
the relevant information to help you. The memory display at the lower
right-hand side of the menu is read-only. It will adjust automatically
according to the memory changed. The following describes each item of
this menu.
Date
The date format is:
Day :
Month :
Date :
Year :
To set the date, highlight the "Date" field and use the PageUp/ PageDown
or +/- keys to set the current time.
28
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Thu, Jan 4 2006
00 : 00 : 00
None
None
None
None
1.44
All, But Keyboard
640K
1013760K
1014784K
Sun to Sat
1 to 12
1 to 31
1999 to 2099
MB877 User's Manual
Item Help
Menu Level
Change the day, month,
Year and century