Setting Up For A Windows 2000/Xp Pc; Setting Up For Windows Vista; Setting Up For A Windows 95/98 System - Intermec EasyLAN 100e User Manual

Chapter 1 — Installing the Adapter
10

Setting Up for a Windows 2000/XP PC

Before you install the printer on a Windows 2000/XP PC, you
need to install the printer driver, InterDriver. See your printer's
Software page on the PrinterCompanion CD for help.
To install the printer, use the Add Printer wizard to add your
printer using the following settings when prompted:
• Choose Local Printer.
• Choose Create a new port and then Standard TCP/IP Port.
• Choose the InterDriver for your printer.
You can print after you install the printer as a TCP/IP port.

Setting up for Windows Vista

Windows Vista uses the installation wizard to manage the
InterDriver set up. Use the Add Printer wizard to add your
printer using the following settings when prompted:
• Choose Local Printer.
• Choose Create a new port and then Standard TCP/IP Port.
• Choose the InterDriver for your printer.
You can print after you install the printer as a TCP/IP port.

Setting Up for a Windows 95/98 System

If you use a Windows 95/98 system, you must install the
Intermec Print Monitor to print over an Ethernet network.
The Intermec Print Monitor is available on the
PrinterCompanion CD that ships with your printer. Print
Monitor creates a network port for the Ethernet link on a
Windows 95/98 system. Consequently, the port acts
transparently with any printer driver for Intermec printers and
any application program. Because it uses TCP/IP, Print Monitor
can be used with IP routers and other IP-based equipment.
EasyLAN 100e Ethernet Adapter User's Guide